{ "currentVersion": 11.3, "cimVersion": "3.3.0", "serviceDescription": "

This landslide susceptibility assessment is intended to be a high-level tool for identifying areas that are susceptible to landsliding across the District, based on mapped landslide and instability features and the relationship between geology and slope angles. The updated mapped susceptibility zones can be considered analogous with the Low, Moderate and High \u201cland stability hazard zones\u201d as outlined in the EES (Whangarei District Council, 2010, \u201cEnvironmental Engineering Standards\u201d), and the information, assessment and reporting requirements stated in the EES will continue to be suitable for the updated mapped land in the District. <\/span><\/span><\/p>

This susceptibility assessment does not remove the requirement for site specific assessment at the time of subdivision, change in land use, or building works that would require consent in a site suitability report. Updates to the District Plan may also require site specific assessments for other activities. Site specific assessments are required to be undertaken by a geotechnical professional to confirm the susceptibility class and the suitability of each site for development. <\/span><\/p>

The map should be read in conjunction with the T+T report dated October 2020, reference 1012149.3000<\/span>: <\/span>\"Landslide Susceptibility<\/span> <\/span>Assessment for Whangarei District Council\". Refer to the report for further detail and applicability limitations. https://kete.wdc.govt.nz/ws/infmgt/active/GIS%20%E2%80%93%20Hazard%20-%20Land%20Instability/20201105.T%2BT%20Landslide%20Susceptibility.pdf<\/span><\/p><\/div>", "mapName": "Land Stability", "description": "This landslide susceptibility assessment is intended to be a high-level tool for identifying areas that are susceptible to landsliding across the District, based on mapped landslide and instability features and the relationship between geology and slope angles. The updated mapped susceptibility zones can be considered analogous with the Low, Moderate and High \u201cland stability hazard zones\u201d as outlined in the EES (Whangarei District Council, 2010, \u201cEnvironmental Engineering Standards\u201d), and the information, assessment and reporting requirements stated in the EES will continue to be suitable for the updated mapped land in the District. This susceptibility assessment does not remove the requirement for site specific assessment at the time of subdivision, change in land use, or building works that would require consent in a site suitability report. Updates to the District Plan may also require site specific assessments for other activities. Site specific assessments are required to be undertaken by a geotechnical professional to confirm the susceptibility class and the suitability of each site for development. The map should be read in conjunction with the T+T report dated October 2020, reference 1012149.3000: \"Landslide Susceptibility Assessment for Whangarei District Council\". Refer to the report for further detail and applicability limitations. https://kete.wdc.govt.nz/ws/infmgt/active/GIS%20%E2%80%93%20Hazard%20-%20Land%20Instability/20201105.T%2BT%20Landslide%20Susceptibility.pdf", "copyrightText": "T+T", "supportsDynamicLayers": true, "layers": [ { "id": 1, "name": "Land Stability", "parentLayerId": -1, "defaultVisibility": true, "subLayerIds": null, "minScale": 40000, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon", "supportsDynamicLegends": true } ], "tables": [], "spatialReference": { "wkid": 2193, "latestWkid": 2193, "xyTolerance": 0.001, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -4020900, "falseY": 1900, "xyUnits": 10000, "falseZ": -100000, "zUnits": 10000, "falseM": -100000, "mUnits": 10000 }, "singleFusedMapCache": false, "initialExtent": { "xmin": 1713285.0012376383, "ymin": 6041562.307377061, "xmax": 1725974.443283189, "ymax": 6050208.908003595, "spatialReference": { "wkid": 2193, "latestWkid": 2193, "xyTolerance": 0.001, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -4020900, "falseY": 1900, "xyUnits": 10000, "falseZ": -100000, "zUnits": 10000, "falseM": -100000, "mUnits": 10000 } }, "fullExtent": { "xmin": 1667893.8483448867, "ymin": 6005510.836139358, "xmax": 1743994.1688269358, "ymax": 6092761.170788611, "spatialReference": { "wkid": 2193, "latestWkid": 2193, "xyTolerance": 0.001, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -4020900, "falseY": 1900, "xyUnits": 10000, "falseZ": -100000, "zUnits": 10000, "falseM": -100000, "mUnits": 10000 } }, "datesInUnknownTimezone": false, "minScale": 40000, "maxScale": 0, "units": "esriMeters", "supportedImageFormatTypes": "PNG32,PNG24,PNG,JPG,DIB,TIFF,EMF,PS,PDF,GIF,SVG,SVGZ,BMP", "documentInfo": { "Title": "Land Instability Update 2022", "Author": "", "Comments": "This landslide susceptibility assessment is intended to be a high-level tool for identifying areas that are susceptible to landsliding across the District, based on mapped landslide and instability features and the relationship between geology and slope angles. The updated mapped susceptibility zones can be considered analogous with the Low, Moderate and High \u201cland stability hazard zones\u201d as outlined in the EES (Whangarei District Council, 2010, \u201cEnvironmental Engineering Standards\u201d), and the information, assessment and reporting requirements stated in the EES will continue to be suitable for the updated mapped land in the District. This susceptibility assessment does not remove the requirement for site specific assessment at the time of subdivision, change in land use, or building works that would require consent in a site suitability report. Updates to the District Plan may also require site specific assessments for other activities. Site specific assessments are required to be undertaken by a geotechnical professional to confirm the susceptibility class and the suitability of each site for development. The map should be read in conjunction with the T+T report dated October 2020, reference 1012149.3000: \"Landslide Susceptibility Assessment for Whangarei District Council\". Refer to the report for further detail and applicability limitations. https://kete.wdc.govt.nz/ws/infmgt/active/GIS%20%E2%80%93%20Hazard%20-%20Land%20Instability/20201105.T%2BT%20Landslide%20Susceptibility.pdf", "Subject": "This map contains data that is part of the report \"Landslide Susceptibility\nAssessment for Whangarei District Council\" prepared by T+T for WDC in 2020. Refer to the report for further detail and applicability limitations. \nhttps://kete.wdc.govt.nz/ws/infmgt/active/GIS%20%E2%80%93%20Hazard%20-%20Land%20Instability/20201105.T%2BT%20Landslide%20Susceptibility.pdf", "Category": "", "Version": "3.3.0", "AntialiasingMode": "None", "TextAntialiasingMode": "None", "Keywords": "WDC,Land Instability,Hazards" }, "supportsQueryDomains": true, "capabilities": "Query,Map,Data", "supportedQueryFormats": "JSON, geoJSON, PBF", "exportTilesAllowed": false, "referenceScale": 0.0, "supportsDatumTransformation": true, "floorAwareMapProperties": { "defaultFloorFilterSettings": {"isEnabled": false} }, "archivingInfo": {"supportsHistoricMoment": false}, "supportsClipping": true, "supportsSpatialFilter": true, "supportsTimeRelation": true, "supportsQueryDataElements": true, "mapUnits": {"uwkid": 9001}, "maxRecordCount": 2000, "maxImageHeight": 4096, "maxImageWidth": 4096, "supportedExtensions": "", "serviceItemId": "bee8969fb7644a6db25a5b625f0fa01b" }